Puffin R - Part 2: Progress Report on His Restoration Therapy.

Good afternoon Everybody:

Cy Bear starting off this week's bulletin - because ever since I chatted with you last week,  it has become obvious that some of the statements made in introducing PuffinR were a little wide of the mark.  Not intentional you understand,  but discovered during the course of Isobel's attention during last week.

First of all, I did say that PuffinR's feet could be re-used:  when they were taken apart, it was found that the stuffing that was still attached was really all that was holding the limbs together.  Isobel decided that he would end up with two new feet, because the fabric initially used for his feet was too damaged to work with new stuffing.  (You can see some of that stuffing in the right foot, still attached to the original body).

Having taken PuffinR apart, Isobel got to work on the template, which has served her well.  She had hoped to be able to get PuffinR completed and on his way to Rhode Island by the end of this week: however "life" intervened with other distractions during the week.   Plus there were some hiccups in Isobel's working with the New Toy,  and it looks as though PuffinR's journey will now begin towards the end of next week,  That is still well before the beginning of March - which contains an important date: NR's, PuffinR's Forever Friend, Birthday.


Progress has been made, however - and I'm now going to hand over to Isobel, who can explain things better - as she's been doing the work!


Hello there Folks!


I'm glad to report that PuffinR is gradually returning to life - but will look different.  However much I try, because of different fabrics involved - the fleece he was originally made with, and the fleeces available here in the UK - do look and feel different.  He's going to still be very cuddly and friendly for NR, but to begin with he will be different, inevitably.


Here's how he's looking:

The new look feet are in place, and PuffinR's Base is almost sewn in - a gap has been left at one of the corners where his Front and Back meet the Base - so that the stuffing can be put in at the appropriate time.  (When it comes to the stuffing, it may still go in at the top (or neck area):  in which case, the gap at the Base will be closed up - obviously!)

The gap doesn't show in the photograph above (showing the Toy inside out), because it's nearer the tail than the front.  That tail is in place as can be seen below:

His two Wings are pinned in place, and will be sewn in properly when the Head is completed.  That's been a bit tricky, because I'd kind of forgotten the order in which I had dis-assembled PuffinR.  However, that difficulty has now been overcome, and the Head should be sewn together and stuffed by the end of play, tonight (Sunday).


Currently, the Beak is ready to be attached to the Head - but I've not yet decided if that will be when the head has been attached to the body, or whether it will be sewn in place before that important seam is created.  Meanwhile, here is a photograph of the Front of the Head with the darts yet to be sewn in. This is also how the finished beak currently looks:

It doesn't look right yet, because the back of the head has yet to be sewn together, but at least you can see what the new beak looks like - unstuffed.


As PuffinR arrived without any eyes, I have selected a couple of options I have in stock  - shown below.   I'm going to show DadR and NR, so they can choose which one is most like the ones they recall PuffinR originally had.  Currently they're shown with the white cheek as a background.  The finished eye will have a black felt background in the middle of the white fleece pieces shown above, and the eye will be in the middle of that addition.  (I can just decipher the shape the felt should be from one of the original cheeks, and propose to trace it and then cut it out in cardboard for a template - to join the rest of the template pieces.)


The eyes are currently not fixed - but one can see the difference between them.

 If DadR and the NR's extended family and friends read this post (we did get a comment from one of them on Cy Bear's bulletin last week), I'm hoping I'll get a comment quickly as to which one they'd like me to fit.  Otherwise, I'll email the pics to DadR  and hopefully get an answer back early in the week, so that PuffinR can be completed.


Those of you who read last week's blog will recall that I had said his original pieces would be a tacked on the inside of each piece before it was stuffed.  While working on PuffinR this week, I decided to actually make a "dry run" - which is what is pictured here.  It gives me an idea as to the best way to go in creating the New Look PuffinR.  (That will then become the new addition to our Toy Shop - www.COLDHAMCUDDLIES.etsy.com).


The second version, still to be cut out, will have those original pieces tacked in place, as Cy Bear described.  It will result, not only in PuffinR being the same size as this model, but he could actually take a little less stuffing.


(Which reminds me:  when I send the photograph of the eyes, I'll need to ascertain if PuffinR in his original state was a "firm" stuffed toy, or a "lightly stuffed toy").  Some of these "mass-produced" toys, as I suspect PuffinR to have been, can be very wobbly indeed, and if NR is to "take" to the new version, I want to make sure that I don't add to the newness of his cherished Forever Friend by making him too firm.  The polyester fibre I use meets all international safety standards, and does eventually "relax",  with time and cuddles, but I really do want to ease the introductory process as much as feasible)


Next week, Cy Bear and I will bring you all up to date - with, hopefully, a Farewell Picture of the two new Friends before PuffinR is sent on his way back HOME to Warwick, Rhode Island, New York, U.S.A.


Good Bye for now - hope everyone has a terrific week, and that Spring will be here soon!  The weather has been particularly nasty this week, although warmer times are said to be on their way.


Isobel.