The Tigger Long-Legs Threesome are Here!

Hello again Everyone!  Cy Bear here - being allowed to introduce the three newest members of the ColdamCuddlies Family.  They were finally listed earlier today, under Etsy Listing #108763404.

Towards the end of last month - 26th and 28th August respectively - Isobel posted here about how she had handled the Treatment of Long-Legged Tiger.  She (or it might have been myself) added that three new versions were in the process of being produced, after she'd created a template from Tiger himself.  This is the story of how they've managed to get into our Shop at www.Etsy.com/coldhamcuddlies.

In the end, Isobel actually cut out and partially sewed four versions, because the original material she had selected for one version - although very handsome- actually turned out to be completely unsuitable.  It frayed unmercifully and no matter how she tried, Isobel was unable to turn the finished body inside out.  The material was just too thick and stubborn, and her arthritic fingers (compounded by the injured right hand she was carrying at the time) could not cope.  So, both the body and the rest of the material she had in her stock were dumped unceremoniously in the dustbin.

The resulting replacement version is Denim Tigger Long-Legs, made from a remnant Isobel found when she was scouting around in her haberdashery outlet in near-by Warminster, "Think Outside the Box".  She gets her felt for our collars and the boots for our Lady Toys from there, as well as other items she comes across (principally our eyes!).

Denim Tigger  in the middle of this picture:  the others are Rusty Tigger Long-Legs (on the left) and Beige Tigger Long-Legs on the right.

Three's Company!

 As all three of them were made in the same way, the description of the sewing process can cover all of them, so this post should not be too lengthy.  The next photograph shows the original three versions spread over Isobel's dining table before she began to put them all together.

This picture shows the discarded version on the left of the circle.  It was made of a velvety fabric, which Isobel had previously been able to use to make tea cosies.  However, the cosies were much bigger and easier to turn inside out, because the material was quite thick and Tigger Long-Legs' limbs were just too small to accommodate the seams etc.  As is the normal procedure when working with tweed and other items with a tendency to fray, Isobel has oversewn all the seams to preserve the integrity of the toys.

As you can see, they don't have as many different pieces as some of the rest of us ColdhamCuddlies do, so are relatively easy to put together.  The paws are sewn on to the arms and the body is sewn up and stuffed.  All three of the Tiggers are made to sit up - just like the model Long Legged Tiger - so, Isobel sews a double line at the top of each leg.  The legs are then stuffed from the bottom, sewn up and the paws stuffed and attached at the appropriate places on each Tigger toy.  The arms are stuffed and sewn at the top of each limb, and slotted into each side of the body.  Once attached, Isobel was able to stuff the body, and that left the head and ears.

This is Beige Tigger Long-Legs

 Isobel seems to have adopted a new routine when it comes to making some of the recent toys.  Once she had placed the eyes in the appropriate spots, she used to stuff the heads and then attach ears, embroider the noses and mouths of us toys and then attached them to the body itself.  She's discovered that it's easier - at least on the more recent toys (the two new Golden Plush Glove Puppets and the Golf Club Head Covers in particular) - to do the facial expressions and then stuff the heads.  The ears are then attached; (sometimes that can take some time!)

Here's Rusty Tigger Long-Legs to join the party!

 

 

Then the head and body get sewed together and Isobel then attaches the white felt collars.  Then, just to add a finishing touch, a multi-coloured lace is tied round the neck and sewn firmly into place and the collar turned over to create a crisp, smart finish to the toys.  The lace is then tied to form a neat bow, which, in turn, is sewn into place.

Lastly - but by no means least - here is Denim Tigger Long-Legs.

They all have mouths embroidered in with Black Double Knitting yarn - matching their respective noses - but because of the black print on the plush fabric, some of them don't show up as well as they might. 

All three have been listed as Tigger Long-Legs Plush Toys in our shop at www.Etsy.com/coldhamcuddlies under their unique Etsy Listing #108763404.  This information has been posted on all the Etsy team forums that Isobel regularly monitors and posts on.  Let's hope they all find their Forever Homes before too long - they are a cheeky bunch of chappies, I can tell you!

Until the next time, hope everyone is well.  It's been nice to post again - and I'm pleased to tell you that Isobel's wonky little finger is beginning to feel like it belongs to her right hand.  It still has a tendency to hit the wrong keys on the computer key-board, but not as frequently!  Good night; Cy Bear

Back to School - now for Halloween!

It’s not just Back to School time:  it’s Back to the ColdhamCuddlies Shop on Etsy.com as well!  After being unofficially closed over the summer months, it officially opened September 1, and I’m pleased to inform you that we have our first order - for a Baby Brown Bunny, which  is off to its Forever Home in Spring, Texas, USA shortly. Let’s hope it’s an omen of things to come!

And to celebrate this auspicious occasion, I have a new White Plush Bunny who has joined Family, and is ready to be introduced to you, our wonderful Followers, as well.  She’s been listed in the shop for some time, and was made just before/and immediately after my dear Peter left us in May.  Needless to say, she was not completed until I got back to Heytesbury in June and I’d just listed her (and meant to back it up with a special blog about her) when, you may recall, I had to dash off to Nottinghamshire again to look after daughter Clare after she’d broken her leg.  Now Clare is well on the way to recovery, I’ve been back some weeks and begun to make new toys and replace others, and suddenly recalled that Hayley, the Hallowe’en Bunny needs to be properly introduced.

At the time I began to make her, I did not intend to label her as a Hallowe’en Bunny, but as I cut out her dress and worked out her decoration, it occurred to me that Black, White and Orange are very traditional colours for this particular season - and the rest, as they say, is history.  So, as Hallowe’en itself is now not that far away, perhaps this is not such an inappropriate time to tell you about Hayley, after all! 

As always, once the pattern has been applied to the fabric I’ve chosen, and it’s been cut out, I begin with the basic body stage.  Here is Hayley with her legs stuffed, and complete with her felt shoes, but still not stuffed in her body.

The next stage, once the upper body has got the polyester fibre inside and sewn up, is to make her pantaloons, which in Hayley’s case are made with white satin nylon, edged with some pretty lace which I found among the goodies I picked up during my last trip to my plush/tweed supplier in nearby Frome, Somerset (The Fine Quality Feather Company). 

I’m due to visit them shortly to renew my stuffing stache and, hopefully, pick up another bag of off cuts.  It’s always a bit like Christmas-coming-early on these visits, because there is a huge big plastic bag waiting for me, which I then go through upon my return home and pick the bits I want to keep and discard the rest.  There are not often too many of the latter I have to say, but, because they are off cuts, some pieces may just not be suitable for me to attack on behalf of the toys and I don’t have the space for any “just in case I might need it later” decisions!

Toy pieces ready for assembly

 But, I digress:  once Hayley’s knickers are in place (I gather them at the ankles and waist and sew them to the legs and body respectively), then the dress top is put together, the arms are made by sewing the furry paws to the arm pieces and then both of them being stuffed and sewn in place each side of the dress bodice.
 

The skirt is then made.  That bit is easy, as it’s a piece of material 36” wide by 18” long, which is gathered at the waist, hemmed, and added to the body over the fitted pantaloons.  One has to adjust the gathers, so that they are evenly spaced round Hayley:  otherwise, the dress does not lie properly when she sits.  (Sometimes, the off cuts are not as wide as 36”:  that’s not necessarily a spoiler.  If I can make a skirt with material up to 28” wide, I have been known to do so - the skirt does not begin to look as though there’s not enough material there!  Any less than 28” though, and the resulting dress can look skimped.)  Once the skirt is satisfactorily fitted, I add the bodice/arm combination, fit it carefully (matching stripes, floral patterns if desired).  This join is actually covered by the apron waistband - but my conscience won’t allow me not to try to match things as I go along.  (Blame my needlework teacher of long ago:  she was a dragon of a lady, who used to make one undo all one’s work if she did not think it was done to her standards!  Habits learned in that way do die hard).

Now we’ve got the head to make:  that normally doesn’t take me too long to do, and I make up the ears at the same time.  Fitting the ears to any of the toys, but particularly the rabbits, can take me quite a while - I often find that one goes on quite easily:  getting the other one to match is another matter.  I used to have a similar problem with the eyes:  however, as I go along, that seems to have eased, as I make up my own techniques to achieve my aims.  Ears though can sometimes be a real problem - but the beauty of plush is that it can be taken apart quite easily, brushed with a wire brush, and then one begins again.

Before stuffing, one gets the eyes in place, making sure that they are firmly fitted.  Then, just recently, I’ve found it easier to embroider the nose and mouth, because one can get one’s hand into the head cavity and control the fabric better.  Then the polyester fibre is stuffed firmly in place, while at the same time, I adjust the shape of the head.  Then comes the ear fight and the head and body are ready to be put together. 

This apron is actually the last one to be made with this particular, opaque fabric.  Until now I've used this remnant from Clare's wedding dress (which I was privileged to be allowed to make), but alas, it has now run out!  Henceforth, all aprons will feature a muslin background, on which decoration - as I fancy at the time - will be applied.

All in all, my dressed Lady Toys take me about 5 days from start to finish:  the Gentlemen, with their complicated stocks and leather boots, jackets etc. take me a day or two longer.  I’m quite pleased with the way Hayley has turned out and as I’ve got enough material to be able to make three versions, I’ve described her as a Limited Edition (No.1 of Three) in Etsy Listing 103038453.  Do hope you like her!